• Home »
  • Wifi Problem in Windows 10

How to fix Wifi Problem in Windows 10?

Refer to the step-by-step instructions mentioned below to perform how to fix Wifi problem in Windows 10.

Step 1: Wi-Fi & Airplane Mode Options

  1. On the home screen of your Windows 10 computer, click the Network icon in the system tray and check if the Wi-Fi option is turned on.
  2. Also, check if the Airplane Mode option is disabled.
  3. Navigate to your network name and make sure the Connected message is displayed.
  4. If so, disconnect it and connect to the same network again.

Step 2: Network Troubleshooter Option

  1. Access the Start menu, click the Settings or gear-shaped icon on the left panel, and select the Network & Internet option followed by the Status option.
  2. Navigate to the Change your network settings section, click the Network Troubleshooter option, and proceed with the rest of the on-screen instructions.

Step 3: Restart your Modem & Router

  1. Disconnect the modem’s power cord as well as the router’s power cord from the power source.
  2. After 60 seconds, connect the modem’s power cord to the power source and turn it on.
  3. The modem might take up to 2 minutes to power up.
  4. Reestablish the connection between the router and the power source.
  5. Wait for at least two minutes before powering up the router.
  6. Check if the Wi-Fi connection issue on the Windows 10 computer has been resolved.
how to fix Wifi problem in Windows 10

Step:4 Narrowing Down the Reason for the Wi-Fi Problem

  1. Try to access any other website from your web browser as the problem might be with the specific website you were trying to access.
  2. To check if the connection between the router and the Windows 10 computer is proper, follow the instructions below.
  3. Open the Command Prompt window on the Windows 10 computer.
  4. Enter the ‘ipconfig’ command without including the single quotes.
  1. When you see the network information in the Command Prompt window, find the Default Gateway field and note down the IP address that is shown in this field.
  2. Now, you have to type ‘ping X’ without the quotes and press the Enter key.
  3. Note: Here, the letter X should be replaced with the IP address of the router.
  4. If you see the results, the problem is not with the connection.
  5. There is a possibility that the problem might be with the modem.

Troubleshooting on Windows 10

How to fix Wifi problem in Windows 10? If the problem is with the Windows 10 computer, carry out the following steps.

Step 1 – Run Network Commands

  1. In the Command Prompt window, type the following command lines and press the Enter key on the keyboard.
  2. Netsh winsock reset
  3. Nettsh int ip reset
  4. Ipconfig/release
  5. Ipconfig/renew
  6. Ipconfig/flushdns
Troubleshoot Windows 10 Computer

Network Adapter Driver

  1. Access the Windows search bar, type ‘Device Manager’ without the quotes, and select the same from the search results.
  2. Click the Network Adapters option, choose your network adapter, and select the Uninstall Device option.
  3. Select the checkbox next to the ‘Delete the driver software for this device’ option and click the Uninstall button.
  4. Once done with uninstalling the network driver, restart the Windows 10 computer by clicking the Power icon followed by the Restart option.

Network Reset

  1. Launch the Settings screen, click the Network & Internet option, and select the Status option followed by the Network Reset option.
  2. Click the Reset Now button. When prompted, select the Yes option for confirmation.
  3. After the network reset, restart the Windows 10 computer and check if the Wi-Fi problem has been resolved.
  4. Now we have seen how to fix Wifi problem in Windows 10 & how to troubleshoot Windows 10 computer
  5. If required, click the Call button to get assistance from our technical support member in resolving this problem.